<strong id="mxjka"><del id="mxjka"></del></strong>
      <ol id="mxjka"><blockquote id="mxjka"></blockquote></ol>
      <legend id="mxjka"><li id="mxjka"></li></legend>
      1. <strong id="mxjka"></strong><track id="mxjka"></track>

        <strong id="mxjka"></strong>
        <acronym id="mxjka"></acronym>

        LPC2378

        芯片信息

        型號 封裝 在線定購
        LPC2378FBD144(查看) LQFP144

        引腳布局

        (點擊圖片看大圖)
        技術資料—— LPC2378 PDF技術資料

        LPC2378 概述

        The LPC2378 microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 pct over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

        The LPC2378 is ideal for multi-purpose serial communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM (LPC2378 only), four UARTs, two CAN channels (LPC2378 only), an SPI interface, two Synchronous Serial Ports (SSP), three I2C-bus interfaces, an I2S-bus interface, and an External Memory Controller (EMC). This blend of serial communications interfaces combined with an on-chip 4 MHz internal oscillator, SRAM of 32 kB, 16 kB SRAM for Ethernet, 8 kB SRAM for USB and general purpose use, together with 2 kB battery powered SRAM make the LPC2378 very well suited for communication gateways and protocol converters. Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, PWM unit, a CAN control unit, and up to 104 fast GPIO lines with up to 50 edge and up to four level sensitive external interrupt pins make the LPC2378 particularly suitable for industrial control and medical systems.

        LPC2378 參數
        LPC2378 存儲器
        FLASH (kB) 512
        RAM (kB) 58
        LPC2378 性能參數
        fmax (MHz) 72
        I/Opins 104
        UART 4
        I²C 3
        I²S 1
        SPI 1
        SSP 2
        ADC 8
        DAC 1
        定時器 4
        PWM 6
        I/O 電壓 (V) 3.3
        CPU 電壓 (V) 3.3
        LPC2378 封裝與引腳
        LQFP144



        撸撸资源