<strong id="mxjka"><del id="mxjka"></del></strong>
      <ol id="mxjka"><blockquote id="mxjka"></blockquote></ol>
      <legend id="mxjka"><li id="mxjka"></li></legend>
      1. <strong id="mxjka"></strong><track id="mxjka"></track>

        <strong id="mxjka"></strong>
        <acronym id="mxjka"></acronym>



        型號 封裝 在線定購
        LPC1113FBD48/301(查看) LQFP48
        LPC1113FBD48/302(查看) LQFP48


        技術資料—— LPC1113 PDF技術資料
        LPC1113 參數
        LPC1113 存儲器
        Flash (KB) 24
        RAM (kB) 8
        LPC1113 其他參數
        fmax (MHz) 50
        I/Opins 42
        UART 1
        I2C 1
        I2S -
        SPI 2
        SSP 2
        ADC 8
        DAC -
        定時器 5
        PWM 11
        I/O 電壓 (V) 3.3
        CPU 電壓 (V) 3.3
        LPC1113 封裝與引腳

        LPC1113 概述

        The LPC1113 devices are a ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.

        The LPC1113 devices operate at CPU frequencies of up to 50 MHz.

        LPC1113 特性

        • System
          • ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
          • ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
          • Serial Wire Debug.
          • System tick timer.
        • Memory
          • 24 kB on-chip flash programming memory.
          • 8 kB SRAM.
          • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
        • Digital peripherals
          • Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors.
          • GPIO pins can be used as edge and level sensitive interrupt sources.
          • High-current output driver (20 mA) on one pin.
          • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
          • Four general purpose counter/timers with a total of four capture inputs and 13 match outputs.
          • Programmable WatchDog Timer (WDT)
        • Analog peripherals
          • 10-bit ADC with input multiplexing among 8 pins.